Cheaha GettingStarted: Difference between revisions

From Cheaha
Jump to navigation Jump to search
Line 174: Line 174:
=== Hardware ===
=== Hardware ===


The Cheaha Compute Platform includes three generations of commodity compute hardware, totaling 2340 compute cores, 20 TB of RAM, and over 4.7PB of usable storage (6.6PB raw capacity). The following descriptions highlight the hardware profile.  
The Cheaha Compute Platform includes three generations of commodity compute hardware, totaling 2340 compute cores, 20 TB of RAM, and over 4.7PB of usable storage (6.6PB raw capacity). The following descriptions highlight the current hardware profile that provides a peak theoretical performance of 110 teraflops.


* Compute  
* Compute  

Revision as of 14:11, 6 October 2017

Cheaha is a cluster computing environment for UAB researchers.Information about the history and future plans for Cheaha is available on the cheaha page.

Access (Cluster Account Request)

To request an account on Cheaha, please send an email to support@listserv.uab.edu to request an account. Please include some background information about the work you plan on doing on the cluster and the group you work with, ie. your lab or affiliation.

Usage of Cheaha is governed by UAB's Acceptable Use Policy (AUP) for computer resources.

The official DNS name of Cheaha's frontend machine is cheaha.rc.uab.edu. If you want to refer to the machine as cheaha, you'll have to either add the "rc.uab.edu" to you computer's DNS search path. On Unix-derived systems (Linux, Mac) you can edit your computers /etc/resolv.conf as follows (you'll need administrator access to edit this file)

search rc.uab.edu

Or you can customize your SSH configuration to use the short name "cheaha" as a connection name. On systems using OpenSSH you can add the following to your ~/.ssh/config file

Host cheaha
 Hostname cheaha.rc.uab.edu

Login

Overview

Once your account has been created, you'll receive an email containing your user ID, generally your Blazer ID. Logging into Cheaha requires an SSH client. Most UAB Windows workstations already have an SSH client installed, possibly named SSH Secure Shell Client or PuTTY. Linux and Mac OS X systems should have an SSH client installed by default.

Usage of Cheaha is governed by UAB's Acceptable Use Policy (AUP) for computer resources.

Client Configuration

This section will cover steps to configure Windows, Linux and Mac OS X clients to connect to Cheaha.

Linux

Linux systems, regardless of the flavor (RedHat, SuSE, Ubuntu, etc...), should already have an SSH client on the system as part of the default install.

  1. Start a terminal (on RedHat click Applications -> Accessories -> Terminal, on Ubuntu Ctrl+Alt+T)
  2. At the prompt, enter the following command to connect to Cheaha (Replace blazerid with your Cheaha userid)
ssh blazerid@cheaha.rc.uab.edu

Mac OS X

Mac OS X is a Unix operating system (BSD) and has a built in ssh client.

  1. Start a terminal (click Finder, type Terminal and double click on Terminal under the Applications category)
  2. At the prompt, enter the following command to connect to Cheaha (Replace blazerid with your Cheaha userid)
ssh blazerid@cheaha.rc.uab.edu

Windows

There are many SSH clients available for Windows, some commercial and some that are free (GPL). This section will cover two clients that are commonly found on UAB Windows systems.

MobaXterm

MobaXterm is a free (also available for a price in a Profession version) suite of SSH tools. Of the Windows clients we've used, MobaXterm is the easiest to use and feature complete. Features include (but not limited to):

  • SSH client (in a handy web browser like tabbed interface)
  • Embedded Cygwin (which allows Windows users to run many Linux commands like grep, rsync, sed)
  • Remote file system browser (graphical SFTP)
  • X11 forwarding for remotely displaying graphical content from Cheaha
  • Installs without requiring Windows Administrator rights

Start MobaXterm and click the Session toolbar button (top left). Click SSH for the session type, enter the following information and click OK. Once finished, double click cheaha.rc.uab.edu in the list of Saved sessions under PuTTY sessions:

Field Cheaha Settings
Remote host cheaha.rc.uab.edu
Port 22
PuTTY

PuTTY is a free suite of SSH and telnet tools written and maintained by Simon Tatham. PuTTY supports SSH, secure FTP (SFTP), and X forwarding (XTERM) among other tools.

  • Start PuTTY (Click START -> All Programs -> PuTTY -> PuTTY). The 'PuTTY Configuration' window will open
  • Use these settings for each of the clusters that you would like to configure
Field Cheaha Settings
Host Name (or IP address) cheaha.rc.uab.edu
Port 22
Protocol SSH
Saved Sessions cheaha.rc.uab.edu
  • Click Save to save the configuration, repeat the previous steps for the other clusters
  • The next time you start PuTTY, simply double click on the cluster name under the 'Saved Sessions' list
SSH Secure Shell Client

SSH Secure Shell is a commercial application that is installed on many Windows workstations on campus and can be configured as follows:

  • Start the program (Click START -> All Programs -> SSH Secure Shell -> Secure Shell Client). The 'default - SSH Secure Shell' window will open
  • Click File -> Profiles -> Add Profile to open the 'Add Profile' window
  • Type in the name of the cluster (for example: cheaha) in the field and click 'Add to Profiles'
  • Click File -> Profiles -> Edit Profiles to open the 'Profiles' window
  • Single click on your new profile name
  • Use these settings for the clusters
Field Cheaha Settings
Host name cheaha.rc.uab.edu
User name blazerid (insert your blazerid here)
Port 22
Protocol SSH
Encryption algorithm <Default>
MAC algorithm <Default>
Compression <None>
Terminal answerback vt100
  • Leave 'Connect through firewall' and 'Request tunnels only' unchecked
  • Click OK to save the configuration, repeat the previous steps for the other clusters
  • The next time you start SSH Secure Shell, click 'Profiles' and click the cluster name

Logging in to Cheaha

No matter which client you use to connect to the Cheaha, the first time you connect, the SSH client should display a message asking if you would like to import the hosts public key. Answer Yes to this question.

  • Connect to Cheaha using one of the methods listed above
  • Answer Yes to import the cluster's public key
    • Enter your BlazerID password
  • After successfully logging in for the first time, You may see the following message just press ENTER for the next three prompts, don't type any passphrases!
It doesn't appear that you have set up your ssh key.
This process will make the files:
     /home/joeuser/.ssh/id_rsa.pub
     /home/joeuser/.ssh/id_rsa
     /home/joeuser/.ssh/authorized_keys

Generating public/private rsa key pair.
Enter file in which to save the key (/home/joeuser/.ssh/id_rsa):
    • Enter file in which to save the key (/home/joeuser/.ssh/id_rsa):Press Enter
    • Enter passphrase (empty for no passphrase):Press Enter
    • Enter same passphrase again:Press Enter
Your identification has been saved in /home/joeuser/.ssh/id_rsa.
Your public key has been saved in /home/joeuser/.ssh/id_rsa.pub.
The key fingerprint is:
f6:xx:xx:xx:xx:dd:9a:79:7b:83:xx:f9:d7:a7:d6:27 joeuser@cheaha.rc.uab.edu

Users without a blazerid (collaborators from other universities)

    • If you were issued a temporary password, enter it (Passwords are CaSE SensitivE!!!) You should see a message similar to this
You are required to change your password immediately (password aged)
WARNING: Your password has expired.
You must change your password now and login again!
Changing password for user joeuser.
Changing password for joeuser
(current) UNIX password:
      • (current) UNIX password: Enter your temporary password at this prompt and press enter
      • New UNIX password: Enter your new strong password and press enter
      • Retype new UNIX password: Enter your new strong password again and press enter
      • After you enter your new password for the second time and press enter, the shell may exit automatically. If it doesn't, type exit and press enter
      • Log in again, this time use your new password

Congratulations, you should now have a command prompt and be ready to start submitting jobs!!!

Hardware

Logical Diagram of Cheaha Configuration

Hardware

The Cheaha Compute Platform includes three generations of commodity compute hardware, totaling 2340 compute cores, 20 TB of RAM, and over 4.7PB of usable storage (6.6PB raw capacity). The following descriptions highlight the current hardware profile that provides a peak theoretical performance of 110 teraflops.

  • Compute
    • 36 Compute Nodes with two 12 core processors (Intel Xeon E5-2680 v3 2.5GHz) with 128GB DDR4 RAM, FDR InfiniBand and 10GigE network cards
    • 38 Compute Nodes with two 12 core processors (Intel Xeon E5-2680 v3 2.5GHz) with 256GB DDR4 RAM, FDR InfiniBand and 10GigE network cards
    • 14 Compute Nodes with two 12 core processors (Intel Xeon E5-2680 v3 2.5GHz) with 384GB DDR4 RAM, FDR InfiniBand and 10GigE network cards
    • 4 Compute Nodes with Nvidia Tesla K80 and two 12 core processors (Intel Xeon E5-2680 v3 2.5GHz) with 128GB DDR4 RAM, FDR InfiniBand and 10GigE network cards
    • 4 Compute Nodes with Intel Phi coprocessor SE10/7120 and two 12 core processors (Intel Xeon E5-2680 v3 2.5GHz) with 128GB DDR4 RAM, FDR InfiniBand and 10GigE network cards
  • Networking
    • FDR InfiniBand Switch
    • 10Gigabit Ethernet Switch
  • Storage -- DDN SFA12KX with GPFS)
    • 2 x 12KX40D-56IB controllers
    • 10 x SS8460 disk enclosures
    • 825 x 4K SAS drives
  • Management
    • Management node and gigabit switch for cluster management
    • Bright Advanced Cluster Management software licenses

Performance

Generation Type Nodes CPUs per Node Cores Per CPU Total Cores Clock Speed (GHz) Instructions Per Cycle Hardware Reference
Gen 6 Intel Xeon E5-2680 v3 96 2 12 2304 2.50 16 Intel Xeon E5-2680 v3
Gen 7†† Intel Xeon E5-2680 v4 18 2 14 504 2.40 16 Intel Xeon E5-2680 v4
Gen 8 Intel Xeon E5-2680 v4 35 2 12 840 2.50 16 Intel Xeon E5-2680 v3
Gen 9 Intel Xeon Gold 6248R 52 2 24 2496 3.0 16 3.0GHz Intel Xeon Gold 6248R
Theoretical Peak Flops = (number of cores) * (clock speed) * (instructions per cycle)
Generation Theoretical Peak Tera-FLOPS
Gen 6 110
Gen 7†† 358
Gen 8 TBD
Gen 9 TBD

Includes four Intel Xeon Phi 7210 accelerators and four NVIDIA K80 GPUs.
†† Includes 72 NVIDIA Tesla P100 16GB GPUs.

Cluster Software

  • BrightCM 7.2
  • CentOS 7.2 x86_64
  • Slurm 15.08

Queuing System

All work on Cheaha must be submitted to our queuing system (Slurm). A common mistake made by new users is to run 'jobs' on the login node. This section gives a basic overview of what a queuing system is and why we use it.

What is a queuing system?

  • Software that gives users fair allocation of the cluster's resources
  • Schedules jobs based using resource requests (the following are commonly requested resources, there are many more that are available)
    • Number of processors (often referred to as "slots")
    • Maximum memory (RAM) required per slot
    • Maximum run time
  • Common queuing systems:
    • Slurm
    • Sun Grid Engine (Also know as SGE, OGE, GE)
    • OpenPBS
    • Torque
    • LSF (load sharing facility)

Slurm is a queue management system and stands for Simple Linux Utility for Resource Management. Slurm was developed at the Lawrence Livermore National Lab and currently runs some of the largest compute clusters in the world. Slurm is now the primary job manager on Cheaha, it replaces SUN Grid Engine ([SGE]) the job manager used earlier.

Typical Workflow

  • Stage data to $USER_SCRATCH (your scratch directory)
  • Research how to run your code in "batch" mode. Batch mode typically means the ability to run it from the command line without requiring any interaction from the user.
  • Identify the appropriate resources needed to run the job. The following are mandatory resource requests for all jobs on Cheaha
    • Maximum memory (RAM) required per slot
    • Maximum runtime
  • Write a job script specifying queuing system parameters, resource requests and commands to run program
  • Submit script to queuing system (sbatch script.job)
  • Monitor job (squeue)
  • Review the results and resubmit as necessary
  • Clean up the scratch directory by moving or deleting the data off of the cluster

Resource Requests

Accurate resource requests are extremely important to the health of the over all cluster. In order for Cheaha to operate properly, the queing system must know how much runtime and RAM each job will need.

Mandatory Resource Requests

  • -t, --time=

Set a limit on the total run time of the job allocation. If the requested time limit exceeds the partition's time limit, the job will be left in a PENDING state (possibly indefinitely).

  • For Array jobs, this represents the maximum run time for each task
    • For serial or parallel jobs, this represents the maximum run time for the entire job
  • --mem-per-cpu=<MB>

Mimimum memory required per allocated CPU in MegaBytes.

Other Common Resource Requests

  • -N, --nodes=<minnodes[-maxnodes]>

Request that a minimum of minnodes nodes be allocated to this job. A maximum node count may also be specified with maxnodes. If only one number is specified, this is used as both the minimum and maximum node count.

  • -n, --ntasks=<number>

sbatch does not launch tasks, it requests an allocation of resources and submits a batch script. This option advises the Slurm controller that job steps run within the allocation will launch a maximum of number tasks and to provide for sufficient resources. The default is one task per node

  • --mem=<MB>

Specify the real memory required per node in MegaBytes.

  • -c, --cpus-per-task=<ncpus>

Advise the Slurm controller that ensuing job steps will require ncpus number of processors per task. Without this option, the controller will just try to allocate one processor per task.

  • -p, --partition=<partition_names>

Request a specific partition for the resource allocation. Available partitions are: express(max 2 hrs), short(max 12 hrs), medium(max 50 hrs), long(max 150 hrs), sinteractive(0-2 hrs)

Submitting Jobs

Batch Jobs are submitted on Cheaha by using the "sbatch" command. The full manual for sbtach is available by running the following command

man sbatch

Job Script File Format

To submit a job to the queuing systems, you will first define your job in a script (a text file) and then submit that script to the queuing system.

The script file needs to be formatted as a UNIX file, not a Windows or Mac text file. In geek speak, this means that the end of line (EOL) character should be a line feed (LF) rather than a carriage return line feed (CRLF) for Windows or carriage return (CR) for Mac.

If you submit a job script formatted as a Windows or Mac text file, your job will likely fail with misleading messages, for example that the path specified does not exist.

Windows Notepad does not have the ability to save files using the UNIX file format. Do NOT use Notepad to create files intended for use on the clusters. Instead use one of the alternative text editors listed in the following section.

Converting Files to UNIX Format
Dos2Unix Method

The lines below that begin with $ are commands, the $ represents the command prompt and should not be typed!

The dos2unix program can be used to convert Windows text files to UNIX files with a simple command. After you have copied the file to your home directory on the cluster, you can identify that the file is a Windows file by executing the following (Windows uses CR LF as the line terminator, where UNIX uses only LF and Mac uses only CR):

$ file testfile.txt
 
testfile.txt: ASCII text, with CRLF line terminators

Now, convert the file to UNIX

$ dos2unix testfile.txt
 
dos2unix: converting file testfile.txt to UNIX format ...

Verify the conversion using the file command

$ file testfile.txt
 
testfile.txt: ASCII text
Alternative Windows Text Editors

There are many good text editors available for Windows that have the capability to save files using the UNIX file format. Here are a few:

  • [Geany] is an excellent free text editor for Windows and Linux that supports Windows, UNIX and Mac file formats, syntax highlighting and many programming features. To convert from Windows to UNIX click Document click Set Line Endings and then Convert and Set to LF (Unix)
  • [Notepad++] is a great free Windows text editor that supports Windows, UNIX and Mac file formats, syntax highlighting and many programming features. To convert from Windows to UNIX click Format and then click Convert to UNIX Format
  • [TextPad] is another excellent Windows text editor. TextPad is not free, however.

Example Batch Job Script

A shared cluster environment like Cheaha uses a job scheduler to run tasks on the cluster to provide optimal resource sharing among users. Cheaha uses a job scheduling system call Slurm to schedule and manage jobs. A user needs to tell Slurm about resource requirements (e.g. CPU, memory) so that it can schedule jobs effectively. These resource requirements along with actual application code can be specified in a single file commonly referred as 'Job Script/File'. Following is a simple job script that prints job number and hostname.

Note:Jobs must request the appropriate partition (ex: --partition=short) to satisfy the jobs resource request (maximum runtime, number of compute nodes, etc...)

#!/bin/bash
#
#SBATCH --job-name=test
#SBATCH --output=res.txt
#SBATCH --ntasks=1
#SBATCH --partition=express
#SBATCH --time=10:00
#SBATCH --mem-per-cpu=100
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=YOUR_EMAIL_ADDRESS

srun hostname
srun sleep 60

Lines starting with '#SBATCH' have a special meaning in the Slurm world. Slurm specific configuration options are specified after the '#SBATCH' characters. Above configuration options are useful for most job scripts and for additional configuration options refer to Slurm commands manual. A job script is submitted to the cluster using Slurm specific commands. There are many commands available, but following three commands are the most common:

  • sbatch - to submit job
  • scancel - to delete job
  • squeue - to view job status

We can submit above job script using sbatch command:

$ sbatch HelloCheaha.sh
Submitted batch job 52707

When the job script is submitted, Slurm queues it up and assigns it a job number (e.g. 52707 in above example). The job number is available inside job script using environment variable $JOB_ID. This variable can be used inside job script to create job related directory structure or file names.

Interactive Resources

Login Node (the host that you connected to when you setup the SSH connection to Cheaha) is supposed to be used for submitting jobs and/or lighter prep work required for the job scripts. Do not run heavy computations on the login node. If you have a heavier workload to prepare for a batch job (eg. compiling code or other manipulations of data) or your compute application requires interactive control, you should request a dedicated interactive node for this work.

Interactive resources are requested by submitting an "interactive" job to the scheduler. Interactive jobs will provide you a command line on a compute resource that you can use just like you would the command line on the login node. The difference is that the scheduler has dedicated the requested resources to your job and you can run your interactive commands without having to worry about impacting other users on the login node.

Interactive jobs, that can be run on command line, are requested with the srun command.

srun --ntasks=1 --cpus-per-task=4 --mem-per-cpu=4096 --time=08:00:00 --partition=medium --job-name=JOB_NAME --pty /bin/bash

This command requests for 4 cores (--cpus-per-task) for a single task (--ntasks) with each cpu requesting size 4GB of RAM (--mem-per-cpu) for 8 hrs (--time).

More advanced interactive scenarios to support graphical applications are available using VNC or X11 tunneling X-Win32 2014 for Windows

Interactive jobs that requires running a graphical application, are requested with the sinteractive command, via Terminal on your VNC window.

sinteractive --ntasks=1 --cpus-per-task=4 --mem-per-cpu=4096 --time=08:00:00 --partition=medium --job-name=JOB_NAME

Please note, sinteractive starts your shell in a screen session. Screen is a terminal emulator that is designed to make it possible to detach and reattach a session. This feature can mostly be ignored. If you application uses `ctrl-a` as a special command sequence (e.g. Emacs), however, you may find the application doesn't receive this special character. When using screen, you need to type `ctrl-a a` (ctrl-a followed by a single "a" key press) to send a ctrl-a to your application. Screen uses ctrl-a as it's own command character, so this special sequence issues the command to screen to "send ctrl-a to my app". Learn more about screen from it's documentation.

Storage

No Automatic Backups

There is no automatic back up of any data on the cluster (home, scratch, or whatever). All data back up is managed by you. If you aren't managing a data back up process, then you have no backup data.

Home directories

Your home directory on Cheaha is NFS-mounted to the compute nodes as /home/$USER or $HOME. It is acceptable to use your home directory as a location to store job scripts, custom code, and libraries. You are responsible for keeping your home directory under 10GB in size!

The home directory must not be used to store large amounts of data. Please use $USER_SCRATCH for actively used data sets and $USER_DATA for storage of non scratch data.

Scratch

Research Computing policy requires that all bulky input and output must be located on the scratch space. The home directory is intended to store your job scripts, log files, libraries and other supporting files.

Important Information:

  • Scratch space (network and local) is not backed up.
  • Research Computing expects each user to keep their scratch areas clean. The cluster scratch area are not to be used for archiving data.

Cheaha has two types of scratch space, network mounted and local.

  • Network scratch ($USER_SCRATCH) is available on the login node and each compute node. This storage is a Lustre high performance file system providing roughly 240TB of storage. This should be your jobs primary working directory, unless the job would benefit from local scratch (see below).
  • Local scratch is physically located on each compute node and is not accessible to the other nodes (including the login node). This space is useful if the job performs a lot of file I/O. Most of the jobs that run on our clusters do not fall into this category. Because the local scratch is inaccessible outside the job, it is important to note that you must move any data between local scratch to your network accessible scratch within your job. For example, step 1 in the job could be to copy the input from $USER_SCRATCH to ${USER_SCRATCH}, step 2 code execution, step 3 move the data back to $USER_SCRATCH.

Network Scratch

Network scratch is available using the environment variable $USER_SCRATCH or directly by /data/scratch/$USER

It is advisable to use the environment variable whenever possible rather than the hard coded path.

Local Scratch

Each compute node has a local scratch directory that is accessible via the variable $LOCAL_SCRATCH. If your job performs a lot of file I/O, the job should use $LOCAL_SCRATCH rather than $USER_SCRATCH to prevent bogging down the network scratch file system. The amount of scratch space available is approximately 800GB.

The $LOCAL_SCRATCH is a special temporary directory and it's important to note that this directory is deleted when the job completes, so the job script has to move the results to $USER_SCRATCH or other location prior to the job exiting.

Note that $LOCAL_SCRATCH is only useful for jobs in which all processes run on the same compute node, so MPI jobs are not candidates for this solution.

The following is an array job example that uses $LOCAL_SCRATCH by transferring the inputs into $LOCAL_SCRATCH at the beginning of the script and the result out of $LOCAL_SCRATCH at the end of the script.

#!/bin/bash
#SBATCH --array=1-10
#SBATCH --share
#SBATCH --partition=express
#
# Name your job to make it easier for you to track
#
#SBATCH --job-name=R_array_job
#
# Set your error and output files
#
#SBATCH --error=R_array_job.err
#SBATCH --output=R_array_job.out
#SBATCH --ntasks=1
#
# Tell the scheduler only need 10 minutes and the appropriate partition
#
#SBATCH --time=00:10:00
#SBATCH --mem-per-cpu=256
#
# Set your email address and request notification when you job is complete or if it fails
#
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=YOUR_EMAIL_ADDRESS

module load R/3.2.0-goolf-1.7.20

echo "TMPDIR: $LOCAL_SCRATCH"

cd $LOCAL_SCRATCH
# Create a working directory under the special scheduler local scratch directory
# using the array job's taskID
mdkir $SLURM_ARRAY_TASK_ID
cd $SLURM_ARRAY_TASK_ID

# Next copy the input data to the local scratch
echo "Copying input data from network scratch to $LOCAL_SCRATCH/$SLURM_ARRAY_TASK_ID - $(date)
# The input data in this case has a numerical file extension that
# matches $SLURM_ARRAY_TASK_ID
cp -a $USER_SCRATCH/GeneData/INP*.$SLURM_ARRAY_TASK_ID ./
echo "copied input data from network scratch to $LOCAL_SCRATCH/$SLURM_ARRAY_TASK_ID - $(date)

someapp -S 1 -D 10 -i INP*.$SLURM_ARRAY_TASK_ID -o geneapp.out.$SLURM_ARRAY_TASK_ID

# Lastly copy the results back to network scratch
echo "Copying results from local $LOCAL_SCRATCH/$SLURM_ARRAY_TASK_ID to network - $(date)
cp -a geneapp.out.$SLURM_ARRAY_TASK_ID $USER_SCRATCH/GeneData/
echo "Copied results from local $LOCAL_SCRATCH/$SLURM_ARRAY_TASK_ID to network - $(date)

Project Storage

Cheaha has a location where shared data can be stored called $SHARE_PROJECT . As with user scratch, this area is not backed up!

This is helpful if a team of researchers must access the same data. Please open a help desk ticket to request a project directory under $SHARE_PROJECT.

Uploading Data

Data can be moved onto the cluster (pushed) from a remote client (ie. you desktop) via SCP or SFTP. Data can also be downloaded to the cluster (pulled) by issuing transfer commands once you are logged into the cluster. Common transfer methods are `wget <URL>`, FTP, or SCP, and depend on how the data is made available from the data provider.

Large data sets should be staged directly to your $USER_SCRATCH directory so as not to fill up $HOME. If you are working on a data set shared with multiple users, it's preferable to request space in $SHARE_PROJECT rather than duplicating the data for each user.

Environment Modules

Environment Modules is installed on Cheaha and should be used when constructing your job scripts if an applicable module file exists. Using the module command you can easily configure your environment for specific software packages without having to know the specific environment variables and values to set. Modules allows you to dynamically configure your environment without having to logout / login for the changes to take affect.

If you find that specific software does not have a module, please submit a helpdesk ticket to request the module.

  • Cheaha supports bash completion for the module command. For example, type 'module' and press the TAB key twice to see a list of options:
module TAB TAB

add          display      initlist     keyword      refresh      switch       use          
apropos      help         initprepend  list         rm           unload       whatis       
avail        initadd      initrm       load         show         unuse        
clear        initclear    initswitch   purge        swap         update
  • To see the list of available modulefiles on the cluster, run the module avail command (note the example list below may not be complete!) or module load followed by two tab key presses:
module avail
 
----------------------------------------------------------------------------------------- /cm/shared/modulefiles -----------------------------------------------------------------------------------------
acml/gcc/64/5.3.1                    acml/open64-int64/mp/fma4/5.3.1      fftw2/openmpi/gcc/64/float/2.1.5     intel-cluster-runtime/ia32/3.8       netcdf/gcc/64/4.3.3.1
acml/gcc/fma4/5.3.1                  blacs/openmpi/gcc/64/1.1patch03      fftw2/openmpi/open64/64/double/2.1.5 intel-cluster-runtime/intel64/3.8    netcdf/open64/64/4.3.3.1
acml/gcc/mp/64/5.3.1                 blacs/openmpi/open64/64/1.1patch03   fftw2/openmpi/open64/64/float/2.1.5  intel-cluster-runtime/mic/3.8        netperf/2.7.0
acml/gcc/mp/fma4/5.3.1               blas/gcc/64/3.6.0                    fftw3/openmpi/gcc/64/3.3.4           intel-tbb-oss/ia32/44_20160526oss    open64/4.5.2.1
acml/gcc-int64/64/5.3.1              blas/open64/64/3.6.0                 fftw3/openmpi/open64/64/3.3.4        intel-tbb-oss/intel64/44_20160526oss openblas/dynamic/0.2.15
acml/gcc-int64/fma4/5.3.1            bonnie++/1.97.1                      gdb/7.9                              iozone/3_434                         openmpi/gcc/64/1.10.1
acml/gcc-int64/mp/64/5.3.1           cmgui/7.2                            globalarrays/openmpi/gcc/64/5.4      lapack/gcc/64/3.6.0                  openmpi/open64/64/1.10.1
acml/gcc-int64/mp/fma4/5.3.1         cuda75/blas/7.5.18                   globalarrays/openmpi/open64/64/5.4   lapack/open64/64/3.6.0               pbspro/13.0.2.153173
acml/open64/64/5.3.1                 cuda75/fft/7.5.18                    hdf5/1.6.10                          mpich/ge/gcc/64/3.2                  puppet/3.8.4
acml/open64/fma4/5.3.1               cuda75/gdk/352.79                    hdf5_18/1.8.16                       mpich/ge/open64/64/3.2               rc-base
acml/open64/mp/64/5.3.1              cuda75/nsight/7.5.18                 hpl/2.1                              mpiexec/0.84_432                     scalapack/mvapich2/gcc/64/2.0.2
acml/open64/mp/fma4/5.3.1            cuda75/profiler/7.5.18               hwloc/1.10.1                         mvapich/gcc/64/1.2rc1                scalapack/openmpi/gcc/64/2.0.2
acml/open64-int64/64/5.3.1           cuda75/toolkit/7.5.18                intel/compiler/32/15.0/2015.5.223    mvapich/open64/64/1.2rc1             sge/2011.11p1
acml/open64-int64/fma4/5.3.1         default-environment                  intel/compiler/64/15.0/2015.5.223    mvapich2/gcc/64/2.2b                 slurm/15.08.6
acml/open64-int64/mp/64/5.3.1        fftw2/openmpi/gcc/64/double/2.1.5    intel-cluster-checker/2.2.2          mvapich2/open64/64/2.2b              torque/6.0.0.1

---------------------------------------------------------------------------------------- /share/apps/modulefiles -----------------------------------------------------------------------------------------
rc/BrainSuite/15b                       rc/freesurfer/freesurfer-5.3.0          rc/intel/compiler/64/ps_2016/2016.0.047 rc/matlab/R2015a                        rc/SAS/v9.4
rc/cmg/2012.116.G                       rc/gromacs-intel/5.1.1                  rc/Mathematica/10.3                     rc/matlab/R2015b
rc/dsistudio/dsistudio-20151020         rc/gtool/0.7.5                          rc/matlab/R2012a                        rc/MRIConvert/2.0.8

--------------------------------------------------------------------------------------- /share/apps/rc/modules/all ---------------------------------------------------------------------------------------
AFNI/linux_openmp_64-goolf-1.7.20-20160616                gperf/3.0.4-intel-2016a                                   MVAPICH2/2.2b-GCC-4.9.3-2.25
Amber/14-intel-2016a-AmberTools-15-patchlevel-13-13       grep/2.15-goolf-1.4.10                                    NASM/2.11.06-goolf-1.7.20
annovar/2016Feb01-foss-2015b-Perl-5.22.1                  GROMACS/5.0.5-intel-2015b-hybrid                          NASM/2.11.08-foss-2015b
ant/1.9.6-Java-1.7.0_80                                   GSL/1.16-goolf-1.7.20                                     NASM/2.11.08-intel-2016a
APBS/1.4-linux-static-x86_64                              GSL/1.16-intel-2015b                                      NASM/2.12.02-foss-2016a
ASHS/rev103_20140612                                      GSL/2.1-foss-2015b                                        NASM/2.12.02-intel-2015b
Aspera-Connect/3.6.1                                      gtool/0.7.5_linux_x86_64                                  NASM/2.12.02-intel-2016a
ATLAS/3.10.1-gompi-1.5.12-LAPACK-3.4.2                    guile/1.8.8-GNU-4.9.3-2.25                                ncurses/5.9-foss-2015b
Autoconf/2.69-foss-2016a                                  HAPGEN2/2.2.0                                             ncurses/5.9-GCC-4.8.4
Autoconf/2.69-GCC-4.8.4                                   HarfBuzz/1.2.7-intel-2016a                                ncurses/5.9-GNU-4.9.3-2.25
Autoconf/2.69-GNU-4.9.3-2.25                              HDF5/1.8.15-patch1-intel-2015b                            ncurses/5.9-goolf-1.4.10
 . 
 .
 .
 .

Some software packages have multiple module files, for example:

  • GCC/4.7.2
  • GCC/4.8.1
  • GCC/4.8.2
  • GCC/4.8.4
  • GCC/4.9.2
  • GCC/4.9.3
  • GCC/4.9.3-2.25

In this case, the GCC module will always load the latest version, so loading this module is equivalent to loading GCC/4.9.3-2.25. If you always want to use the latest version, use this approach. If you want use a specific version, use the module file containing the appropriate version number.

Some modules, when loaded, will actually load other modules. For example, the GROMACS/5.0.5-intel-2015b-hybrid module will also load intel/2015b and other related tools.

  • To load a module, ex: for a GROMACS job, use the following module load command in your job script:
module load  GROMACS/5.0.5-intel-2015b-hybrid 
  • To see a list of the modules that you currently have loaded use the module list command
module list
 
Currently Loaded Modulefiles:
  1) slurm/15.08.6                                       9) impi/5.0.3.048-iccifort-2015.3.187-GNU-4.9.3-2.25  17) Tcl/8.6.3-intel-2015b
  2) rc-base                                            10) iimpi/7.3.5-GNU-4.9.3-2.25                         18) SQLite/3.8.8.1-intel-2015b
  3) GCC/4.9.3-binutils-2.25                            11) imkl/11.2.3.187-iimpi-7.3.5-GNU-4.9.3-2.25         19) Tk/8.6.3-intel-2015b-no-X11
  4) binutils/2.25-GCC-4.9.3-binutils-2.25              12) intel/2015b                                        20) Python/2.7.9-intel-2015b
  5) GNU/4.9.3-2.25                                     13) bzip2/1.0.6-intel-2015b                            21) Boost/1.58.0-intel-2015b-Python-2.7.9
  6) icc/2015.3.187-GNU-4.9.3-2.25                      14) zlib/1.2.8-intel-2015b                             22) GROMACS/5.0.5-intel-2015b-hybrid
  7) ifort/2015.3.187-GNU-4.9.3-2.25                    15) ncurses/5.9-intel-2015b
  8) iccifort/2015.3.187-GNU-4.9.3-2.25                 16) libreadline/6.3-intel-2015b
  • A module can be removed from your environment by using the module unload command:
module unload GROMACS/5.0.5-intel-2015b-hybrid
  • The definition of a module can also be viewed using the module show command, revealing what a specific module will do to your environment:
module show GROMACS/5.0.5-intel-2015b-hybrid 
-------------------------------------------------------------------
/share/apps/rc/modules/all/GROMACS/5.0.5-intel-2015b-hybrid:

module-whatis  GROMACS is a versatile package to perform molecular dynamics,
 i.e. simulate the Newtonian equations of motion for systems with hundreds to millions of particles. - Homepage: http://www.gromacs.org 
conflict   GROMACS 
prepend-path   CPATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/include 
prepend-path   LD_LIBRARY_PATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/lib64 
prepend-path   LIBRARY_PATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/lib64 
prepend-path   MANPATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/share/man 
prepend-path   PATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/bin 
prepend-path   PKG_CONFIG_PATH /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/lib64/pkgconfig 
setenv     EBROOTGROMACS /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid 
setenv     EBVERSIONGROMACS 5.0.5 
setenv     EBDEVELGROMACS /share/apps/rc/software/GROMACS/5.0.5-intel-2015b-hybrid/easybuild/GROMACS-5.0.5-intel-2015b-hybrid-easybuild-devel 
-------------------------------------------------------------------

Error Using Modules from a Job Script

If you are using modules and the command your job executes runs fine from the command line but fails when you run it from the job, you may be having an issue with the script initialization. If you see this error in your job error output file

-bash: module: line 1: syntax error: unexpected end of file
-bash: error importing function definition for `BASH_FUNC_module'

Add the command `unset module` before calling your module files. The -V job argument will cause a conflict with the module function used in your script.

Sample Job Scripts

The following are sample job scripts, please be careful to edit these for your environment (i.e. replace YOUR_EMAIL_ADDRESS with your real email address), set the h_rt to an appropriate runtime limit and modify the job name and any other parameters.

Hello World is the classic example used throughout programming. We don't want to buck the system, so we'll use it as well to demonstrate jobs submission with one minor variation: our hello world will send us a greeting using the name of whatever machine it runs on. For example, when run on the Cheaha login node, it would print "Hello from login001".

Hello World (serial)

A serial job is one that can run independently of other commands, ie. it doesn't depend on the data from other jobs running simultaneously. You can run many serial jobs in any order. This is a common solution to processing lots of data when each command works on a single piece of data. For example, running the same conversion on 100s of images.

Here we show how to create job script for one simple command. Running more than one command just requires submitting more jobs.

  • Create your hello world application. Run this command to create a script, turn it into to a command, and run the command (just copy and past the following on to the command line).
cat > helloworld.sh << EOF
#!/bin/bash
echo Hello from `hostname`
EOF
chmod +x helloworld.sh
./helloworld.sh
  • Create the Slurm job script that will request 256 MB RAM and a maximum runtime of 10 minutes.
$ vi helloworld.job
#!/bin/bash
#SBATCH --share
#SBATCH --partition=express
#
# Name your job to make it easier for you to track
#
#SBATCH --job-name=helloworld
#
# Set your error and output files
#
#SBATCH --error=helloworld.err
#SBATCH --output=helloworld.out
#SBATCH --ntasks=1
#
# Tell the scheduler only need 10 minutes
#
#SBATCH --time=00:10:00
#SBATCH --mem-per-cpu=256
#
# Set your email address and request notification when you job is complete or if it fails
#
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=$USER@uab.edu

./helloworld.sh
  • Submit the job to Slurm scheduler and check the status using squeue
$ sbatch helloworld.job
Submitted batch job 52888
  • When the job completes, you should have output files named helloworld.out and helloworld.err
$ cat helloworld.out 
Hello from c0003

Hello World (parallel with MPI)

MPI is used to coordinate the activity of many computations occurring in parallel. It is commonly used in simulation software for molecular dynamics, fluid dynamics, and similar domains where there is significant communication (data) exchanged between cooperating process.

Here is a simple parallel Slurm job script for running commands the rely on MPI. This example also includes the example of compiling the code and submitting the job script to the Slurm scheduler.

  • First, create a directory for the Hello World jobs
$ mkdir -p ~/jobs/helloworld
$ cd ~/jobs/helloworld
  • Create the Hello World code written in C (this example of MPI enabled Hello World includes a 3 minute sleep to ensure the job runs for several minutes, a normal hello world example would run in a matter of seconds).
$ vi helloworld-mpi.c
#include <stdio.h>
#include <mpi.h>

main(int argc, char **argv)
{
   int rank, size;

   int i, j;
   float f;

   MPI_Init(&argc,&argv);
   MPI_Comm_rank(MPI_COMM_WORLD, &rank);
   MPI_Comm_size(MPI_COMM_WORLD, &size);

   printf("Hello World from process %d of %d.\n", rank, size);
   sleep(180);
   for (j=0; j<=100000; j++)
      for(i=0; i<=100000; i++)
          f=i*2.718281828*i+i+i*3.141592654;

   MPI_Finalize();
}
  • Compile the code, first purging any modules you may have loaded followed by loading the module for OpenMPI GNU. The mpicc command will compile the code and produce a binary named helloworld_gnu_openmpi
$ module purge
$ module load OpenMPI/1.8.8-GNU-4.9.3-2.25

$ mpicc helloworld-mpi.c -o helloworld_gnu_openmpi
  • Create the Slurm job script that will request 8 cpu slots and a maximum runtime of 10 minutes
$ vi helloworld.job
#!/bin/bash
#SBATCH --share
#SBATCH --partition=express
#
# Name your job to make it easier for you to track
#
#SBATCH --job-name=helloworld_mpi
#
# Set your error and output files
#
#SBATCH --error=helloworld_mpi.err
#SBATCH --output=helloworld_mpi.out
#SBATCH --ntasks=8
#
# Tell the scheduler only need 10 minutes
#
#SBATCH --time=00:01:00
#SBATCH --mem-per-cpu=256
#
# Set your email address and request notification when you job is complete or if it fails
#
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=YOUR_EMAIL_ADDRESS

module load OpenMPI/1.8.8-GNU-4.9.3-2.25
mpirun -np $SLURM_NTASKS helloworld_gnu_openmpi
  • Submit the job to Slurm scheduler and check the status using squeue -u $USER
$ sbatch helloworld.job

Submitted batch job 52893

$ squeue -u BLAZERID
             JOBID PARTITION     NAME     USER ST       TIME  NODES NODELIST(REASON)
             52893   express hellowor   BLAZERID  R       2:07      2 c[0005-0006]

  • When the job completes, you should have output files named helloworld_mpi.out and helloworld_mpi.err
$ cat helloworld_mpi.out

Hello World from process 1 of 8.
Hello World from process 3 of 8.
Hello World from process 4 of 8.
Hello World from process 7 of 8.
Hello World from process 5 of 8.
Hello World from process 6 of 8.
Hello World from process 0 of 8.
Hello World from process 2 of 8.

Hello World (serial) -- revisited

The job submit scripts (sbatch scripts) are actually bash shell scripts in their own right. The reason for using the funky #SBATCH prefix in the scripts is so that bash interprets any such line as a comment and won't execute it. Because the # character starts a comment in bash, we can weave the Slurm scheduler directives (the #SBATCH lines) into standard bash scripts. This lets us build scripts that we can execute locally and then easily run the same script to on a cluster node by calling it with sbatch. This can be used to our advantage to create a more fluid experience in moving between development and production job runs.

The following example is a simple variation on the serial job above. All we will do is convert our Slurm job script into a command called helloworld that calls the helloworld.sh command.

If the first line of a file is #!/bin/bash and that file is executable, the shell will automatically run the command as if were any other system command, eg. ls. That is, the ".sh" extension on our HelloWorld.sh script is completely optional and is only meaningful to the user.

Copy the serial helloworld.job script to a new file, add a the special #!/bin/bash as the first line, and make it executable with the following command (note: those are single quotes in the echo command):

echo '#!/bin/bash' | cat helloworld.job > helloworld ; chmod +x helloworld

Our sbatch script has now become a regular command. We can now execute the command with the simple prefix "./helloworld", which means "execute this file in the current directory":

./helloworld
Hello from login001

Or if we want to run the command on a compute node, replace the "./" prefix with "sbatch ":

$ sbatch helloworld
Submitted batch job 53001

And when the cluster run is complete you can look at the content of the output:

$ $ cat helloworld.out 
Hello from c0003

You can use this approach of treating you sbatch files as command wrappers to build a collection of commands that can be executed locally or via sbatch. The other examples can be restructured similarly.

To avoid having to use the "./" prefix, just add the current directory to your PATH. Also, if you plan to do heavy development using this feature on the cluster, please be sure to run sinteractive first so you don't load the login node with your development work.

Gromacs

#!/bin/bash
#SBATCH --share
#SBATCH --partition=express
#
# Name your job to make it easier for you to track
#
#SBATCH --job-name=test_gromacs
#
# Set your error and output files
#
#SBATCH --error=test_gromacs.err
#SBATCH --output=test_gromacs.out
#SBATCH --nodes=2
#SBATCH --ntasks-per-node=4
#
# Tell the scheduler only need 10 minutes
#
#SBATCH --time=00:01:00
#SBATCH --mem-per-cpu=256
#
# Set your email address and request notification when you job is complete or if it fails
#
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=YOUR_EMAIL_ADDRESS

module load OpenMPI/1.8.8-GNU-4.9.3-2.25

module load GROMACS/5.0.5-intel-2015b-hybrid 

# Change directory to the job working directory if not already there
cd ${USER_SCRATCH}/jobs/gromacs

# Single precision
MDRUN=mdrun_mpi

# Enter your tpr file over here
export MYFILE=example.tpr

srun mpirun $MDRUN -v -s $MYFILE -o $MYFILE -c $MYFILE -x $MYFILE -e $MYFILE -g ${MYFILE}.log

R

The following is an example job script that will use an array of 10 tasks (--array=1-10), each task has a max runtime of 2 hours and will use no more than 256 MB of RAM per task.

Create a working directory and the job submission script

$ mkdir -p ~/jobs/ArrayExample
$ cd ~/jobs/ArrayExample
$ vi R-example-array.job
#!/bin/bash
#SBATCH --array=1-10
#SBATCH --share
#SBATCH --partition=express
#
# Name your job to make it easier for you to track
#
#SBATCH --job-name=R_array_job
#
# Set your error and output files
#
#SBATCH --error=R_array_job.err
#SBATCH --output=R_array_job.out
#SBATCH --ntasks=1
#
# Tell the scheduler only need 10 minutes
#
#SBATCH --time=00:10:00
#SBATCH --mem-per-cpu=256
#
# Set your email address and request notification when you job is complete or if it fails
#
#SBATCH --mail-type=FAIL
#SBATCH --mail-user=YOUR_EMAIL_ADDRESS

module load R/3.2.0-goolf-1.7.20 
cd ~/jobs/ArrayExample/rep$SLURM_ARRAY_TASK_ID
srun R CMD BATCH rscript.R

Submit the job to the Slurm scheduler and check the status of the job using the squeue command

$ sbatch R-example-array.job
$ squeue -u $USER

Installed Software

A partial list of installed software with additional instructions for their use is available on the Cheaha Software page.