AGILE (gpu image reconstruction library)

From UABgrid Documentation
(Difference between revisions)
Jump to: navigation, search
(Using AGILE: Add section for AGILE on desktop)
m (Build and Install AGILE Library: Fix variable name syntax)
Line 82: Line 82:
  make install
  make install
  cd ../..
  cd ../..
  export $AGILE_LIB_HOME=$PWD/agile-lib/
  export AGILE_LIB_HOME=$PWD/agile-lib/
==== Run Example Reconstruction ====
==== Run Example Reconstruction ====

Revision as of 14:11, 9 December 2011

AGILE (Environment for Linear and non-linear Image reconstruction using GPU Acceleration) is an open source library for GPU accelerated reconstruction problems in medical imaging. AGILE is developed at the Institute of Medical Engineering, Gratz University of Technology. It includes reconstruction code for Magnetic Resonance Imaging and Fluorescence Tomography, and was developed and tested on Linux systems.



AGILE is available as a source code bundle and requires a GPU to execute.

AGILE on Desktop

You can run AGILE on your desktop (or other system) as long as it has a GPU installed. You will need to adapt the build instructions for Cheaha below to fit your environment. The instructions for Cheaha are based on a CentOS 5.5 system environment.

The main change will likely be in the location of your CUDA Toolkit and SDK. You may also want to adjust or skip the steps to install the dependencies if you platform already has them installed, though there isn't any harm installing them again in your build directory as described (only a slight disk storage cost).

AGILE on Cheaha

At this time, AGILE can only be run on Cheaha by building from source and running directly on the demonstration GPU node.

Preliminary Requirements

Before getting started, please review the Software Build Considerations to help create a sane, reproducible software product.

Using or building software for the GPU on Cheaha requires that you directly log into the GPU compute node. Start an SSH session with and after you log in execute a second SSH to the GPU compute node.

ssh cheaha-compute-1-9

Set up Build Environment

The build instructions below will assume all commands are executed from a directory dedicated to the AGILE build, after you are logged into the GPU compute node, set up your build environment. In addition to your base build environment you will need the CUDA compiler utilities.

mkdir agile-build
cd agile-build
PATH=/bin:/usr/bin; unset LD_LIBRARY_PATH
module load cuda/cuda-4

Install Dependencies for AGILE Build


CMake is a build management tool that provides utilities to support cross platform code. The CMake project provides a 32-bit binary for Linux that you can use. The utilities only control the build process, therefore the 32-bit code CMake code should not affect the 64-bit AGILE binaries produced below.

tar xvfz cmake-2.8.6-Linux-i386.tar.gz

Boost is a collection of peer-reviewed portable C++ libraries that are targeted for standardization. Install boost with:

wget ''
tar xvfz boost_1_48_0.tar.gz 
cd boost_1_48_0
./ --prefix=$PWD/../boost
./b2 install
cd ..

Doxygen is a documentation system that supports many languages and builds documentation from source code and comments embedded in the source code, helping ensure accurate API documentation.

tar xvfz doxygen- 
cd doxygen-
./configure --prefix $PWD/../doxygen
make install
cd ..
export PATH=$PATH:$PWD/doxygen/bin

Build and Install AGILE Library

The AGILE library is built in a dedicated sub-directory of the AGILE source code extract. The following steps install the AGILE library in the build directory and sets an environment variable $AGILE_LIB_HOME that may be useful for additional work with the AGILE library.

cd agile
mkdir build
cd build
make install
cd ../..
export AGILE_LIB_HOME=$PWD/agile-lib/

Run Example Reconstruction

AGILE comes with a number of tutorials and an example reconstruction code for total generalized variation (TGV2) image reconstruction from multiple coil data. See paper in reference at AGILE site. More information is available the corresponding readme.txt file:

less $MY_AGILE_BUILD_HOME/agile/apps/tgv_radial_image_recon/readme.txt

You can run this example in your current build environment with the following commands:

cd $MY_AGILE_BUILD_HOME/agile/apps/tgv_radial_image_recon
../../build/apps/tgv_radial_image_recon/nfft2d_tgv_recon_nogfx -param=recon_32_param.txt

This run will produce the output file recon_32.dat

AGILE Support

AGILE is not supported on Cheaha beyond the above build instructions provided for AGILE.

AGILE Tutorials

Please visit the AGILE web site for information on use.


Thanks to Dr. Purushotham Bangalore, CIS@UAB for the original build script for AGILE.

Please visit the AGILE home page for all additional needs.

Personal tools